The first two towers were manufactured in Aug 2002. These towers are
27 Meters high and are referenced as the East and West towers. The third
tower (South tower) is 45 Meters high and was manufactured in Sep 2005.
The towers were manufactured by Ali CN8TW.

Click on a photo for a larger image or use the Slide Show button     SLIDE SHOW

This section is a metric clone of the Rohn 45. Each section is 3 meters long.

This section is a metric clone of the Rohn 45. Each section is 3 meters long.

The rotor plate is designed for Prosistel rotors.

Each tower utilizes a second thrust bearing to facilitate rotor repair.

The tower base section is 1 meter long.

Each tower uses 6 guy anchor posts. This allows for 270° rotation of side mounted antennas.

The towers are a metric clone of Rohn45. This is the jig used to bend the Z bracing

A complete welded section. Each section was galvanized in Morocco.

Finished Z bracing. The rod diameter is 1 CM

Tower sections after galvanization

Galvanized guy anchor base.

Rotor shelf.

Website by psws.com