The 3 towers are positioned in a 60 Meter triangle. They are labeled as the East West and South towers.
Diagrams of the interface boxes and circuits used to help automate the station.
The first two towers were installed in an 8 day period. of Morocco.
Yagi construction started in the spring of 2002.
The three 40M yagis are all short yagis.
The 2 el 80 meter yagi project was started in April 2003.
The 1 el 160M project was started in April 2003.
The first two towers were installed in an 8 day period.
Sidemounts were used to reduce the number of towers
The tower is 45 Meters high. This tower was painted prior to installation.
There are 3 rotating 40M yagis, all at different heights.
The 2 EL 80M yagi was installed in September 2003
The 160M rotating dipole was installed in September 2003
A 2 element array for 160M
This vertical is a top performer.
Receive antennas consisting of 2 K9AY Loop antennas
Single wire, BiDirectional and staggered beverage design details
Photos of early beverages
Staggered phased beverages.
The Radio Shack construction was finished in Sep. 2002
Backup and guest operating position
Photos of the shack interface boxes and circuits.
There are ~30 feedlines. Most feedlines are H1000 Coax. All RF switching is done inside of the shack.
Tools used to build and maintain the CN2R station
A 17KW 3 phase generator provides emergency power.
A few photos of the people who provided all of the construction help at the station.
1985-2005 RIP
Website by psws.com